PUNCH P400X1 – 400 Watts Mono Amplifier

PUNCH P400X1 – 400 Watts Mono Amplifier

38,790.00

The Punch P400X1 is a mono amplifier capable of producing 400 Watts into a 2-Ohm load and is designed for medium to high-powered subwoofer applications. You can also use the P400X1 for multi-speaker center channel applications.

SKU: P400X1 Categories: ,

Call RockfordFosgate Support in Your City

Description

P400X1

The Punch P400X1 mono amplifier is specifically designed for medium to high-powered subwoofer applications. It's variable crossover and built-in Punch EQ allow for precise tuning of Bass frequencies, and its 2-Ohm mono stability is perfect for running up to four 4-Ohm DVC subwoofers. You can also add-on the PLC2 Remote Punch Level Control to control equalization from under the dash or center console. Sized to fit under any seat, you can hide this amplifier and have them guessing where the amp is.

  • High level input capable with Auto Turn-On circuit
  • RCA pass-thru outputs
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz.
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection
  • 1 Year Standard Warranty
  • Get a 1 Year Extended Warranty

 

Specification

  • CEA-2006 Compliant:
    • CEA-2006 Power Rating
    • 250W x 1 @ 4Ω
    • ≤1.0% THD+N
  • Number of Channels: 1
  • Rated Power (RMS Continuous Power):
    • 250 Watts x 1 @ 4-Ohm
    • 400 Watts x 1 @ 2-Ohm
  • Total Power (Sum of Rated Power): 400 Watts
  • Dynamic Power (PVC/PowerCube®):
    • 327 Watts x 1 @ 4-Ohms 0° Res
    • 563 Watts x 1 @ 2-Ohms 0° Res
  • Bridgeable: No
  • Frequency Response: 20Hz to 20kHz +/- 1.0dB
  • Efficiency (average): 73% @ 4-Ohm
  • Total Harmonic Distortion (THD+Noise):
    • 4-Ohm: <1.0%
    • 2-Ohm: <1.0%
  • Crossover Controls:
    • High-Pass (HP): 50Hz-250Hz @ 12dB/octave ButterworthLow-Pass (LP): 50-250Hz 12dB/octave Butterworth | All-Pass: Yes
  • Tone Controls:
    • Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
    • Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
    • Function depends upon LP/AP/HP switch position
  • Input Sensitivity: 150 mV - 12 V
  • Signal Input: Hi/Low level: 1 RCA pair
  • Signal Output: Low Level: 1 RCA Pair
  • Power Input Connector: Captive C-Clamp
  • Power Wire Gauge: 8 AWG to 4 AWG
  • Speaker Output Connector: Captive C-Clamp
  • Speaker Wire Gauge: 8 AWG to 18 AWG
  • Heat Sink Type: Cast aluminum
  • Cooling: Convection
  • Remote Controls: Optional Punch Level Control (PLC2) Ready
  • Visual Indicators: Power Thermal Protect
  • Circuit Topology Class: Class-A/B
  • Operating Voltage: 9 - 16 VDC
  • Recommended Fuse (not included): 60 A
  • Max. Current Draw (13.8V Sinewave): 60 A
  • Average Current Draw (13.8V Music): 30 A
  • Suggested Alternator: 75 A
  • Dimensions (H x W x D): 2.38 x 7.76 x 9.86 (in) | 6.05 x 19.71 x 25.04 (cm)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

preloader