12" Punch P2 4-Ohm DVC Subwoofer


The Rockford Fosgate P2 12” subwoofer continues “The PUNCH” tradition. The P2D4-12 features a Dual 4-Ohm voice coil, 400 Watts RMS power handling, and can accommodate a grille insert using the included cast aluminum trim ring.

More details


Add to wishlist

Mail: info@rockfordfosgate.in
Helpline: 1 800 209 6820


Rockford Fosgate has always been known as "The PUNCH" and the P2 12" subwoofer certainly continues with the tradition. Kevlar fiber reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.

  • Dual linear spider with embedded 16 AWG tinsel leads
  • Custom 10-AWG nickel plated push terminals
  • Extended pole piece and bumped vented backplate
  • High-temp voice coil with spun-laced Nomex® re-inforcement collar
  • Protective PVC textured magnet cover
  • Kevlar fiber reinforced paper cone
  • StampCast basket with integrated spider venting
  • Diamond cut cast aluminum trim ring with optional grille
CEA-2031 Compliant: CEA-2031 Guidelines
Size: 12"
Nominal Impedance: Dual 4-Ohm
Power Handling (Watts RMS): 400 Watts RMS
800 Watts Max
Voice Coil Diameter: 2.25" (57.15 mm)
Magnet Weight (oz): 72.8 oz. (2.06 kg.)
Speaker Connector: Dual 10 AWG compression
Fs (Hz): 27.2
Re (Ohms): 6.40
Le (mH): 5.5
Qms: 6.30
Qes: 0.59
Qts: 0.54
Vas (Liters): 81.5
Sd (cm2): 570
SPL (dB @ 1w/1m): 86
Xmax (mm): 13.3
Woofer Displacement (in): 0.085 cu.ft. (2.4 Liters)
Cutout Diameter (in): 11.22 in. (285 mm)
Mounting Depth (in): 6.40 in. (162 mm)
Shipping Weight: 15.6 Lbs. (7.07 kg)
Wiring Wizard
Rockford FosgateWoofer WiringWizard

Available Wiring Diagrams

Please consult your amplifier owner's manual for lowest recommended impedance. 

Wiring Diagram #1 

Wiring Diagram #2 

Wiring Diagram #3 

Wiring Diagram #4 

Wiring Diagram #5 

Wiring Diagram #6 

Wiring Diagram #7 

Wiring Diagram #8 

Wiring Diagram #9 

Speaker Polarity
Your woofer may use one of the following to identify (+/-) terminals.
Positive +
red post
purple (4Ώ)
red (8Ώ)
Negative -
black post
no dot
no dot

5 other products in the same category: