400 Watt 4-Channel Amplifier

T400-4

The Power T400-4 is a 4-channel amplifier capable of producing 100 Watts into each of its four channels at 2-Ohms. The T400-4 can run a 4-way full-range system or use component speakers on the front with subwoofers on the rear.

More details

₹48,990

Add to wishlist

Enquiry:
Mail: info@rockfordfosgate.in
Helpline: 1 800 209 6820

T400-4

The T400-4 amplifier is perfect for front/rear fading stereo systems or when dedicated amplification is required between front stage speakers and rear subwoofer(s). Thanks to the Dynamic Thermal Management, the small chassis design insures it can be installed in any location – like under front seats.

  • 24dB/octave crossover
  • 2/4 channel input switch
  • MOSFET power supply
  • MOSFET output stage
  • 4 Gauge power/ground connectors
  • Audiophile grade speaker connections
  • 2 Years Standard Warranty 
  • Get a 1 Year Extended Warranty 
 
Specification
CEA-2006 Compliant: CEA-2006 Power Rating
60W x 4 @ 4Ω
≤1.0% THD+N
Number of Channels: 4
Rated Power
(RMS Continuous Power):
  60 Watts x 4 @ 4-Ohm
100 Watts x 4 @ 2-Ohm
200 Watts x 2 @ 4-Ohm Bridged
2-Ohm x 2 Bridged Stable
Total Power
(Sum of Rated Power):
400 Watts RMS
Dynamic Power
(PVC/PowerCube®):
  84 Watts x 4 @ 4-Ohm 0° Res
139 Watts x 4 @ 2-Ohm 0° Res
272 Watts x 2 @ 4-Ohm Bridged
Bridgeable: Yes
Frequency Response: 20Hz to 20kHz +/- 1dB
Efficiency (average): 69% @ 4-Ohm
68% @ 2-Ohm
Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0%
2-Ohm: <1.0%
Crossover Controls: Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Tone Controls: Front Channels - Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz

Rear Channels - Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Input Sensitivity: 150 mV to 4 V
Signal Input: Front Low level: 1 RCA pair
Rear Low level: 1 RCA pair
Signal Output: n/a
Power Input Connector: Block
Power Wire Gauge: 8 AWG to 4 AWG
Speaker Output Connector: Screw terminal barrier strip
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional Remote Punch EQ
(overrides rear channel built-in Punch EQ)
Visual Indicators: Power
Thermal
Protect
Circuit Topology Class: Class-A/B
Operating Voltage: 9 - 16 VDC
Recommended Fuse
(not included):
60 A
Max. Current Draw (13.8V Sinewave): 60 A
Average Current Draw (13.8V Music): 30 A
Suggested Alternator: 75 A
Shipping Weight: 11.90 Lbs. (5.39 Kg.)
Dimensions (H x W x D): 2.14 x 8.14 x 13.66 (in)
5.42 x 20.68 x 34.69 (cm)
Dimensional Diagram:

3 other products in the same category: