POWER T400-4 – 400 Watts 4-Channel Amplifier

Description

T400-4

The T400-4 amplifier is perfect for front/rear fading stereo systems or when dedicated amplification is required between front stage speakers and rear subwoofer(s). Thanks to the Dynamic Thermal Management, the small chassis design insures it can be installed in any location – like under front seats.

• 24dB/octave crossover
• 2/4 channel input switch
• MOSFET power supply
• MOSFET output stage
• 4 Gauge power/ground connectors
• Audiophile grade speaker connections
• 2 Years Standard Warranty
• Get a 1 Year Extended Warranty

Specification

• CEA-2006 Compliant: CEA-2006 Power Rating | 60W x 4 @ 4Ω | ≤1.0% THD+N
• Number of Channels: 4
• Rated Power (RMS Continuous Power):
  • 60 Watts x 4 @ 4-Ohm
  • 100 Watts x 4 @ 2-Ohm
  • 200 Watts x 2 @ 4-Ohm Bridged
  • 2-Ohm x 2 Bridged Stable
• Total Power (Sum of Rated Power): 400 Watts RMS
• Dynamic Power (PVC/PowerCube®):
  • 84 Watts x 4 @ 4-Ohm 0° Res
  • 139 Watts x 4 @ 2-Ohm 0° Res
  • 272 Watts x 2 @ 4-Ohm Bridged
• Bridgeable: Yes
• Frequency Response: 20Hz to 20kHz +/- 1dB
• Efficiency (average):
  • 69% @ 4-Ohm
  • 68% @ 2-Ohm
• Total Harmonic Distortion (THD+Noise):
  • 4-Ohm: <1.0%
  • 2-Ohm: <1.0%
• Crossover Controls:
  • Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth
  • Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
  • Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth
  • Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
• Tone Controls:
  • Front Channels - Punch EQ
  • Treble: 0dB to +12dB @ 12kHz
  • Bass: 0dB to +18dB @ 45Hz
  • Rear Channels - Punch EQ
  • Treble: 0dB to +12dB @ 12kHz
  • Bass: 0dB to +18dB @ 45Hz
• Input Sensitivity:  150 mV to 4 V
• Signal Input:
  • Front Low level: 1 RCA pair
  • Rear Low level: 1 RCA pair
• Power Input Connector: Block
• Power Wire Gauge: 8 AWG to 4 AWG
• Speaker Output Connector: Screw terminal barrier strip
• Speaker Wire Gauge: 8 AWG to 18 AWG
• Heat Sink Type: Cast aluminum
• Cooling: Convection
• Remote Controls: Optional Remote Punch EQ (overrides rear channel built-in Punch EQ)
• Visual Indicators:
  • Power
  • Thermal
  • Protect
• Circuit Topology Class: Class-A/B
• Operating Voltage: 9 - 16 VDC
• Recommended Fuse (not included): 60 A
• Max. Current Draw (13.8V Sinewave): 60 A
• Average Current Draw (13.8V Music): 30 A
• Suggested Alternator: 75 A
• Dimensions (H x W x D): 2.14 x 8.14 x 13.66 (in) | 5.42 x 20.68 x 34.69 (cm)