POWER T500-1BDCP – 500 Watts Class-bd Constant Power Amplifier

Description

T500-1bdCP

The T500-1bdCP is based on the legendary T500-1bd amplifier design with a proprietary "Constant Power" configuration delivering up to 25% more power (Watts) across all impedance loads. The listening experience is cleaner, louder and more impressive than ever before. With the T500-1bdCP, you can now use an "under-the-seat" dedicated subwoofer amplifier to drive two 4-Ohm DVC subwoofers. This amp will provide enough bass to separate you from those envious car audio geeks.

• 24dB/octave crossover
• MOSFET power supply
• MOSFET output stage
• 4 Gauge power/ground connectors
• Audiophile grade speaker connections
• RCA pass-thru outputs
• Infrasonic filter
• 2 Years Standard Warranty
• Get a 1 Year Extended Warranty

Specification

• CEA-2006 Compliant: CEA-2006 Power Rating | 300W x 1 @ 4Ω | ≤1.0% THD+N
• Number of Channels: 1
• Rated Power (RMS Continuous Power):
  • 300 Watts x 1 @ 4-Ohm
  • 500 Watts x 1 @ 2-Ohm
  • 500 Watts x 1 @ 1-Ohm
• Total Power(Sum of Rated Power):  500 Watts RMS
• Dynamic Power (PVC/PowerCube®):
  • 328 Watts x 1 @ 4-Ohms
  • 537 Watts x 1 @ 2-Ohms
  • 707 Watts x 1 @ 1-Ohm
• Bridgeable: No
• Frequency Response: 20Hz to 250Hz +/- 0.5dB
• Efficiency (average):
  • 86.2% @ 4-Ohm
  • 82.3% @ 2-Ohm
  • 73.4% @ 1-Ohm
• Total Harmonic Distortion (THD+Noise):
• 4-Ohm: <1.0%
• 2-Ohm: <1.0%
• 1-Ohm: <1.0%
• Crossover Controls: Low-Pass (LP): 35-250Hz 24dB/octave Butterworth
• Tone Controls: Bass: 0dB to +18dB @ 45Hz
• Infrasonic Filter: -3dB @ 28Hz 12dB/Octave
• Input Sensitivity: 150 mV to 4 V
• Signal Input: Low level: 1 RCA pair
• Signal Output: Low Level: 1 RCA pair
• Power Input Connector: Block
• Power Wire Gauge: 4 AWG
• Speaker Output Connector: Screw terminal barrier strip
• Speaker Wire Gauge: 8 AWG to 18 AWG
• Heat Sink Type: Cast aluminum
• Cooling: Convection
• Remote Controls: Optional Remote Punch Bass EQ (overrides built-in Punch Bass EQ)
• Visual Indicators:
• Power
• Thermal
• Protect
• Circuit Topology Class: Class-BD
• Operating Voltage: 9 - 16 VDC
• Recommended Fuse (not included): 80 A
• Max. Current Draw (13.8V Sinewave): 70 A
• Average Current Draw (13.8V Music): 35 A
• Suggested Alternator: 75 A
• Dimensions (H x W x D): 2.14 x 8.14 x 11.41 (in) | 5.42 x 20.68 x 28.97 (cm)