POWER T500-1BDCP – 500 Watts Class-bd Constant Power Amplifier

POWER T500-1BDCP – 500 Watts Class-bd Constant Power Amplifier

56,490.00

The Power T500-1bdCP is a 500 Watt mono amplifier featuring Constant Power delivering up to 25% more power across all impedance loads. The frequency response of the T500-1bdCP is optimized exclusively for use with subwoofers.

Out of stock

SKU: T500-1BDCP Categories: ,

Call RockfordFosgate Support in Your City

Description

T500-1bdCP

The T500-1bdCP is based on the legendary T500-1bd amplifier design with a proprietary "Constant Power" configuration delivering up to 25% more power (Watts) across all impedance loads. The listening experience is cleaner, louder and more impressive than ever before. With the T500-1bdCP, you can now use an "under-the-seat" dedicated subwoofer amplifier to drive two 4-Ohm DVC subwoofers. This amp will provide enough bass to separate you from those envious car audio geeks.

  • 24dB/octave crossover
  • MOSFET power supply
  • MOSFET output stage
  • 4 Gauge power/ground connectors
  • Audiophile grade speaker connections
  • RCA pass-thru outputs
  • Infrasonic filter
  • 2 Years Standard Warranty
  • Get a 1 Year Extended Warranty

 

Specification

  • CEA-2006 Compliant: CEA-2006 Power Rating | 300W x 1 @ 4Ω | ≤1.0% THD+N
  • Number of Channels: 1
  • Rated Power (RMS Continuous Power):
    • 300 Watts x 1 @ 4-Ohm
    • 500 Watts x 1 @ 2-Ohm
    • 500 Watts x 1 @ 1-Ohm
  • Total Power(Sum of Rated Power):  500 Watts RMS
  • Dynamic Power (PVC/PowerCube®):
    • 328 Watts x 1 @ 4-Ohms
    • 537 Watts x 1 @ 2-Ohms
    • 707 Watts x 1 @ 1-Ohm
  • Bridgeable: No
  • Frequency Response: 20Hz to 250Hz +/- 0.5dB
  • Efficiency (average):
    • 86.2% @ 4-Ohm
    • 82.3% @ 2-Ohm
    • 73.4% @ 1-Ohm
  • Total Harmonic Distortion (THD+Noise):
  • 4-Ohm: <1.0%
  • 2-Ohm: <1.0%
  • 1-Ohm: <1.0%
  • Crossover Controls: Low-Pass (LP): 35-250Hz 24dB/octave Butterworth
  • Tone Controls: Bass: 0dB to +18dB @ 45Hz
  • Infrasonic Filter: -3dB @ 28Hz 12dB/Octave
  • Input Sensitivity: 150 mV to 4 V
  • Signal Input: Low level: 1 RCA pair
  • Signal Output: Low Level: 1 RCA pair
  • Power Input Connector: Block
  • Power Wire Gauge: 4 AWG
  • Speaker Output Connector: Screw terminal barrier strip
  • Speaker Wire Gauge: 8 AWG to 18 AWG
  • Heat Sink Type: Cast aluminum
  • Cooling: Convection
  • Remote Controls: Optional Remote Punch Bass EQ (overrides built-in Punch Bass EQ)
  • Visual Indicators:
  • Power
  • Thermal
  • Protect
  • Circuit Topology Class: Class-BD
  • Operating Voltage: 9 - 16 VDC
  • Recommended Fuse (not included): 80 A
  • Max. Current Draw (13.8V Sinewave): 70 A
  • Average Current Draw (13.8V Music): 35 A
  • Suggested Alternator: 75 A
  • Dimensions (H x W x D): 2.14 x 8.14 x 11.41 (in) | 5.42 x 20.68 x 28.97 (cm)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

preloader